ENDUIT CARRELAGE C300 is a paste putty for indoor and outdoor use. It covers all the surface irregularities and can be used on the old tiles.
ENDUIT CARRELAGE C300 is a paste putty with a very high filling power and good adhesion and doesn’t crack at filled joints.
- Very low COV
- Very easy to apply
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Stainless knife
Dilution: Ready to use
Application method: Apply the first coat of ENDUIT CARRELAGE C300 with the knife and fill the joints between tiles.
2 °/ After 6 hours of drying, apply the 2nd layer to obtain a smooth surface.
Spreading-rate: 1 to 2 sqm/kg
Drying: Touch dry : 1 h
re-coatable : 6 h
Cleaning of equipments: With water, immediately after use
Density: 1.650 +/- 0.05
PH : 7.5 / 8.5
Viscosity: 1300 +/-200 Po at 25°C
Binder: Aqueous dispersion
Appearance of the film:
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
4 kg, 15 kg
Famille IV Classe 4b
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet.
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.