Products

Home / Products

You can search for the product you want directly

Enduit Anti Fissuration F400
enduit-anti-fissuration
enduit-anti-fissuration
enduit-anti-fissuration
ENDUIT DE FISSURATION

DESCRIPTION:

ENDUIT DE FISSURATION is a powder filler designed to cover surface irregularities and to fill deep cracks (up to 5 cm).
Destination: For Indoor use
GENERAL FEATURES:
  • Odourless
  • Very low COV
  • Very easy to apply

PREPARATION & APPLICATION:

Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Stainless Knife
Dilution: 45% to 50% of water
Application method: Eliminate non-adherent parts. Apply one coat of ODAPRIM or PIGMAPRIM as primer. After 3 hours of drying, fill holes and cracks with ENDUIT DE FISSURATION F400 up to 5 cm. Let it dry for 5h.
Spreading-rate: Depending on the surface state and the thickness applied.
Drying: Touch dry: 1 h
re-coatable: 24 h
Cleaning of equipments: With water, immediately after use

Technical characteristics:

Presentation:
Density:
PH :
Viscosity:
Binder: Special binder
VOC:
SVOC:
Thinner:
Appearance of the film: Matt
Colour:
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.

Precaution information:

the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.

Packaging:

0.5 Kg, 2kg

Classification:

NM03-3-009 Category III, class 2

Health & Safety:

This product is not classified as dangerous. For more details, consult the safety data sheet.

Cost calculator

m2?

Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.

* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Technical data