ENDUIT FACADE is a powder filler based on a hydraulic binder.
ENDUIT FAÇADE EF 700 is designed for the filling and surfacing of the exterior and interior masonry surface.
ENDUIT FACADE is prepared by addition of water.
Destination: Indoor/Outdoor use
- Very low COV
- Very easy to apply
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Stainless Knife
Dilution: 15 to 30% of water, the mixture can be made by hand but better results are obtained with an agitator. Once prepared, the past is kept about 48 hours in closed can
Application method: Apply the first coat of ENDUIT FAÇADE EF 700 with the aid of the knife and smooth immediately in order to avoid the thicknesses.
After 12 hours of drying, apply the 2nd coat of ENDUIT FAÇADE EF 700 to obtain a smooth surface.
Spreading-rate: 2 to 3 sqm/kg in thin layer
Drying: Touch dry: 1 h
re-coatable: 12 h
Cleaning of equipments: With water, immediately after use
Binder: Vinyl binder
Appearance of the film: Matt
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
4 kg, 25 kg
NFT 60-803 category IV
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.