Home / Products

You can search for the product you want directly



ODASTOP is a past putty designed for indoor work. It reseals and masks the surface asperities.
ODASTOP gives a smooth surface allowing to obtain perfect finishes.
Destination: For Indoor use
  • Odourless
  • Very low COV
  • Very easy to apply


Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Stainless Knife
Dilution: Ready to use
Application method: 1 °/apply a layer of ODASTOP with the knife to be smeared and straightened in order to avoid the thicknesses.
2 °/ After 6 hours of drying, apply a 2nd layer to obtain a perfect smooth surface.
Spreading-rate: 2 to 3 sqm/kg
Drying: Touch dry: 1 h
re-coatable: 6 h
Cleaning of equipments: With water, immediately after use

Technical characteristics:

Density: 1.90 +/- 0.05
PH : 7.5 / 8.5
Viscosity: 2400 +/-500 Po at 25°C
Binder: Aqueous dispersion
Thinner: Water
Appearance of the film: Mat
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.

Precaution information:

the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.


1 kg, 5 kg, 25 kg


NFT 30-608
Category III, class 2

Health & Safety:

This product is not classified as dangerous. For more details, consult the safety data sheet. Edition

Cost calculator


Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.

* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Technical data