Products

Home / Products

You can search for the product you want directly

arantic
Arantic
arantic
ARANTIC

DESCRIPTION:

ARANTIC CARRARA & CLASSICO are an ecological water borne mineral coatings based on special lime.
ARANTIC CARRARA & CLASSICO allow an excellent rustic decorative effect.
Destination: For Indoor use
GENERAL FEATURES:
  • Odourless
  • Very easy to apply

PREPARATION & APPLICATION:

Surface Preparation: (Referred to the D.T.U. 59.1 requirements) : The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains
Application Tools: Stainless steel trowel
Dilution: Ready to use
Application method: The surface must be prepared with ODAMAT
1°/ PESTO Effect
Apply two coats of ARANTIC Classico and one coat of ARANTIC Classico mixed with the COCCIO PESTO. After 8h of drying, apply ODACIRE plus or ARANTIC soap ( To improve scrub resistance).
2°/ RIVER SAND
Effect Apply one coat of the ARANTIC CARRARA mixed with River Sand and two coats of ARANTIC CLASSICO at 8h intervals between coats. Apply ODACIRE plus or ARANTIC soap ( To improve scrub resistance).
3°/ METALLICA & CARRARA
Effect Apply one coat of the ARANTIC CARRARA (white or black according to the chosen reference), then one coat of ARANTIC METALLICA (Silver, bronze, gold or copper according to the chosen reference)
Spreading-rate: ARANTIC CARRARA : 2 sqm/kg in 2 coats
ARANTIC CLASSICO : 1.5 to 2 sqm/Kg in 3 coats
Drying: Touch dry : 4 h
re-coatable : 12 h
Cleaning of equipments: With water, immediately after use

Technical characteristics:

Presentation:
Density: 1.55 +/- 0.05
PH :
Viscosity: 1500 +/- 100 Po at 25°C for white
Binder: Aqueous dispersion
VOC:
SVOC:
Thinner: Water
Appearance of the film: Semi- gloss
Colour: According to colour brichure
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.

Precaution information:

the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.

Packaging:

4 kg, 8 kg, 20 kg

Classification:

NM03-3-009
Category I Class 7b2.

Health & Safety:

This product is not classified as dangerous. For more details, consult the safety data sheet.

Cost calculator

m2?

Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.

* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Cover
Technical data