Home / Products

You can search for the product you want directly



OLMASS is an ecological waterborne sandblasted effect with soft touch.
OLMASS Sublime your walls, bringing them brightness and light
OLMASS is applied on surface prepared with PRIMER DECOLISS
Destination: For Indoor use
  • Odourless
  • Very low COV
  • Very easy to apply
  • Doesn t leave lap marks
  • Can be touched-up
  • Available in many colors


Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Spalter 10 to 12 cm
Dilution: 5 to 10% of water
Application method: The support must be prepared in advance with PRIMER DECOLISS diluted up to 10% of water.
After 8 hours of drying, apply OLMASS by using the Spalter in random movements.
Spreading-rate: 9 to 10 sqm/Kg
Drying: Tack free : 1 h
re-coatable : 3h
Cleaning of equipments: With water, immediately after use

Technical characteristics:

Density: 1,3 +/- 0.05
PH : 7,5 / 8,5
Viscosity: 125 +/- 5 KU at 25°C
Binder: Aqueous dispersion
VOC: Less than 41.2 g/L (requirement according to the repository Ecolabel EU: 80g/L)
SVOC: Less than 8.01 g/L (requirement according to the repository Ecolabel EU: 50g/L)
Thinner: Water
Appearance of the film: Sandy
Colour: More than 55 colours are available
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.

Precaution information:

the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.


Kit : 1,2 Kg OLMASS & 1,4 Kg Primer DECOLISS


Category I Class 7a2.

Health & Safety:

This product is not classified as dangerous. For more details, consult the safety data sheet.

Cost calculator


Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.

* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Technical data