OPERLA is an ecological waterborne paint with iridescent effect.
OPERLA offers through its pearlescent aspect an elegant final aspect
Destination: For Indoor use
- Very low COV
- Very easy to apply
- Doesn t leave lap marks
- Can be touched-up
- Available in many colors
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Spalter & special spatula
Dilution: Ready to use
Application method: The support must be prepared in advance with ODAMAT. Apply a layer of DECOFONDO according to the selected colour, and allow to dry during 8 hours. On a surface of approx. 1-2 sqm, apply OPERLA by using Spalter in random movements, and after about 10 to 20 minutes, gently smoothen with a special OPERLA spatula the applied surfaces. After 8 hours of drying, apply the second layer in the same way.
Spreading-rate: KIT 15 sqm
Drying: Tack free : 1h
re-coatable : 3h
Cleaning of equipments: With water, immediately after use
Density: 1 +/- 0.05
PH : 7,5 / 8,5
Viscosity: 100+/- 5 KU at 25°C
Appearance of the film: Pearlescent
Colour: More than 89 colours are available
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
KIT15sqm : OPERLA Base :2Kg
DECOFONDO : 2.6Kg & PERLESCENT 150g
Category I Class 7a2
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet.
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.