OSTORA is an ecological waterborne pain with stunning metallic
patterns designed for the decoration of interior spaces.
chromatic effects create a perfect combination of styles offering an
exceptional mixture of refinement and charm.
Destination: For Indoor use
- Very low COV
- Very easy to apply
- Doesn t leave lap marks
- Can be touched-up
- Available in many colors
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Plastic trowel/ Spalter 100 mm – 150 mm/ Spatula
Dilution: Ready to use
Application method: The support must be prepared in advance with PRIMER DECOFONDO.
Divide the prepared surface into a grid of 1 to 2 sqm and apply OSTORA
by using spalter brushstrokes in a random movements.
Wait 10 min and smooth the applied surface with the same spalter (clean
Let it dry for 5 to 15 minutes, and smooth softly the applied area by
using a spatula or a plastic trowel.
Spreading-rate: 4 to 5 sqm/Kg
Drying: Tack free : 1 h
re-coatable : 3h
Cleaning of equipments: With water, immediately after use
Density: 1,05 +/- 0.05
PH : 7,5 / 8,5
Viscosity: 140 +/- 5 KU at 25°C
Binder: Aqueous dispersion
VOC: Less than 11.1 g/L(requirement according to the repository Ecolabel EU: 80g/L)
SVOC: Less than 0.5 g/L(requirement according to the repository Ecolabel EU: 50g/L)
Appearance of the film: Pearl appearance
Colour: More than 50 colours are available
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
Category I Class 7b2
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet.
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.