PLATINIA
DESCRIPTION:
PLATINIA is an ecological waterborne paint especially designed for the high decoration, giving a modern, pearly, sparkling and luminescent
effect due to its ultra fine metalized pigment.
Destination: Intérieur
GENERAL FEATURES:
- Odourless
- Very low COV
- Very easy to apply
- Doesn t leave lap marks
- Can be touched-up
- Available in many colors
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Plastic trowel/Brush (100mm-150mm)
Dilution: Ready to use
Application method: On the support prepared in advance with ODAMAT, apply a layer of primer
DECOFONDO.
After 8 hours of drying, apply the first coat of PLATINIA with the plastic trowel in such a way that it covers the entire surface to be painted.
2nd coat: After 4 hours of drying apply the 2nd layer in a circular way.
Note:
The application of a layer of WAXY as a top coat improves the scrub resistance.
After 8 hours of drying, apply the first coat of PLATINIA with the plastic trowel in such a way that it covers the entire surface to be painted.
2nd coat: After 4 hours of drying apply the 2nd layer in a circular way.
Note:
The application of a layer of WAXY as a top coat improves the scrub resistance.
Spreading-rate: 4 to 5 sqm/kg
Drying: Tack free: 1 h
re-coatable: 3h
re-coatable: 3h
Cleaning of equipments: With water, immediately after use
Technical characteristics:
Presentation:
Density: 1.2 +/- 0.05
PH : 7.5 / 8.5
Viscosity: 550 +/- 50 Po at 25°C
Binder: Aqueous dispersion
VOC: Less than 37 g/L(requirement according to the repository Ecolabel EU: 80g/L)
SVOC: Less than 17 g/L(requirement according to the repository Ecolabel EU: 80g/L)
Thinner: Water
Appearance of the film: Matt pearly
Colour: More than 40 colours are available
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
Precaution information:
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
Packaging:
1 kg, 2.5 kg, 10 kg, 20 kg
Classification:
NM03-3-009
Category I Class 7b2
Category I Class 7b2
Health & Safety:
Cost calculator
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.
×
Technical data