ROST is an ecological waterborne paint with oxidized metal effect.
ROST is designed to ensure a high-end decoration.
ROST The use of ROST wax as a top coat allows to create the new effects of the aged metals.
Destination: For Indoor use
- Very low COV
- Very easy to apply
- Doesn t leave lap marks
- Can be touched-up
- Available in many colors
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Stainless trowel
Dilution: Ready to use
Application method: On a well-prepared substrate, apply the first coat of ROST by using stainless trowel, then pass the roller to have a slightly poached appearance.
After 8 hours of drying, apply the second coat of ROST with stainless trowel to create the product effect.
After 8 hours of drying, apply one layer of ROST wax by using the same application tool with cross movements, remove any accumulation of product.
After at least 8 hours, apply a second coat of ROST wax in circular movement by using a stainless trowel
Spreading-rate: Kit 6sqm
Drying: Tack free : 1h
re-coatable : 8h
Cleaning of equipments: With water, immediately after use
Density: 1.6 +/- 0.05 for ROST & 1.00 +/- 0.05 for ROST Wax
PH : 7.5 / 8.5
Viscosity: 1500 +/- 100 Po at 25°C for ROST & 135+/- 5KU for ROST Wax
Binder: Aqueous dispersion
Appearance of the film:
Colour: According to the colour brochure
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
ROST : 3Kg
ROST Wax : 1.2Kg
Category I Class 7a2.
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet. Edition
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.