Home / Products

You can search for the product you want directly



Shamia is an ecological waterborne paint with natural marble effects.
Shamia is inspired from the venetian style and the traditional Moroccan Tadellakt.
Shamia is suitable for all interior spaces such as living rooms, receptions, lobbies.
Destination: For Indoor use
  • Odourless
  • Very low COV
  • Very easy to apply
  • Doesn t leave lap marks
  • Can be touched-up


Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Stainless steel trowel
Dilution: Ready to use
Application method: 1°/ Using a stainless steel trowel Apply one coat of SHAMIA Create the marble effect immediately after applying the first coat.
2°/ Wait 8 hours and apply a second coat of SHAMIA using the same tool.
3°/ To obtain the desired brightness, wait 4 hours and smoothen the applied area with the same trowel.
NOTE : To improve the scrub resistance, we recommend to apply “ODACIRE +” as a transparent top coat
Spreading-rate: 2 to 3 sqm/kg
Drying: 4 h
re-coatable : 8 h
Cleaning of equipments:

Technical characteristics:

Density: 1.6 +/- 0.05
PH : 7.5 / 8.5
Viscosity: 1500 +/- 200 Po at 25°C for white
Binder: Aqueous dispersion
VOC: Less than 0.5 g/L (requirement according to the repository Ecolabel EU: 80g/L)
SVOC: Less than 0.5 g/L (requirement according to the repository Ecolabel EU: 50g/L)
Thinner: Water
Appearance of the film: High gloss
Colour: Available in White, can be tinted with ODATEINTE (do not exceed 5%)
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.

Precaution information:

the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.


25 kg


Category I Class 7a2.

Health & Safety:

This product is not classified as dangerous. For more details, consult the safety data sheet.

Cost calculator


Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.

* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Technical data