Home / Products

You can search for the product you want directly



VINYTEK is an ecological waterborne, high quality paint based on copolymer binder, designed for indoor and outdoor neat finishes
VINYTEK presents a high covering power and a high whiteness, offering an excellent durability and a great scrub resistance.
Destination: Indoor/Outdoor use
  • Odourless
  • Very low COV
  • Very easy to apply


Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: roller or brush
Dilution: 5 to 10 % water for brush & roller
Application method: Apply the first coat of VINYTEK diluted up to10% with roller or brush
2nd coat : After 3 hours of drying apply the 2nd coat of VINYTEK diluted up to 5%
Spreading-rate: 8 à 9 sqm/kg
Drying: Dust free: ½ h
Touch dry: 1h
re-coatable: 3h
Cleaning of equipments: With water, immediately after use

Technical characteristics:

Density: 1.65 +/- 0.05
PH : 7.5 / 8.5
Viscosity: 550 +/- 50 Po at 25°C
Binder: Copolymer aqueous dispersion.
VOC: Less than 1 g/L(requirement according to the repository Ecolabel EU: 10g/L).
Thinner: Water
Appearance of the film: Smooth, matt finish
Colour: Available in White, can be tinted with ODATEINTE (do not exceed 5%) or according to colour card.
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.

Precaution information:

the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.


5 kg,30 kg


Category I class 7a2.

Health & Safety:

This product is not classified as dangerous. For more details, consult the safety data sheet.

Cost calculator


Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.

* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Technical data