ODALAC
DESCRIPTION:
ODALAC is a water borne high gloss ecological acrylic paint intended for the
protection and decoration of wall surfaces in new work and maintenance (eg:
hospitals, operating blocks, hotels and kitchens.. etc).
ODALAC has an excellent adhesion on all supports, including old paints (Glycerophthalic, acrylic)
Destination: Indoor/Outdoor use
GENERAL FEATURES:
- Odourless
- Very low COV
- Very easy to apply
- Doesn t leave lap marks
- Can be touched-up
- Available in many colors
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity
and salt stains.
Application Tools: roller or brush
Dilution: 5 to 10 % water for brush & roller
Application method: In order to have a smooth final appearance, the support must be prepared
beforehand with ODAMAT as undercoat.
Apply the first coat of ODALAC diluted up to 10% with roller or brush
2nd coat :
After 3 hours of drying apply the 2nd coat of ODALAC diluted up to 5%
Apply the first coat of ODALAC diluted up to 10% with roller or brush
2nd coat :
After 3 hours of drying apply the 2nd coat of ODALAC diluted up to 5%
Spreading-rate: 11-12 sqm/Kg
Drying: Dust free : ½ h
Touch dry : 1 h
recoatable : 3h
Touch dry : 1 h
recoatable : 3h
Cleaning of equipments: With water, immediately after use
Technical characteristics:
Presentation:
Density: 1,21 +/- 0.05
PH : 7,5 / 8,5
Viscosity: 100 +/- 5 KU at 25°C
Binder: Acrylic Aqueous dispersion
VOC: Less than 1.2 g/L (requirement according to the repository Ecolabel EU: 40g/L)
SVOC: Less than 0.5 g/L (requirement according to the repository Ecolabel EU: 30g/L)
Thinner: Water
Appearance of the film: Glossy
Colour: Available in White, can be tinted with ODATEINTE (not to exceed 5%)
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding
extremes of temperatures and protect from frost.
Precaution information:
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply
below 5°C (41°F) temperature and above 85 % relative humidity level.
Packaging:
1 Kg, 4 Kg, 15 Kg
Classification:
NM03-3-009
Category I class 7b2.
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet .
Cost calculator
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Technical data