ODASAT

DESCRIPTION:

ODASAT is an ecological waterborne acrylic paint with a smooth semi-gloss finish, with a high scrub and yellowing resistance.

ODASAT is designed for the protection of wall surfaces in new work and maintenance (e.g. hospitals, operating blocks, hotels and kitchens.. etc.)

Destination: For Indoor use

GENERAL FEATURES:

Odourless
Very low COV
Very easy to apply
Doesn t leave lap marks
Can be touched-up
Available in many colors

PREPARATION & APPLICATION:

Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.

Application Tools: roller or brush or spray gun

Dilution: to 10 % water for brush & roller
30% for spray gun

Application method: In order to have a smooth final appearance, the support must be prepared beforehand with ODAMAT as undercoat. Apply the first coat of ODASAT diluted up to 10% with roller or brush
2nd coat : After 3 hours of drying apply the 2nd coat of ODASAT diluted up to 5%

Spreading-rate: 1st coat : 8 à 9 sqm/Kg
2nd coat : 9 à 10 sqm/Kg

Drying: Dust free : ½ h
Touch dry : 1 h
re-coatable : 3h

Cleaning of equipments: With water, immediately after use

Technical characteristics:

Presentation:

Density: 1,3 +/- 0.05

PH : 7,5 / 8,5

Viscosity: 100 +/- 5 KU at 25°C

Binder: Acrylic Aqueous dispersion

VOC: Less than 1.2 g/L(requirement according to the repository Ecolabel EU: 40g/L)

SVOC: Less than 0.5 g/L(requirement according to the repository Ecolabel EU: 30g/L)

Thinner: Water

Appearance of the film: Semi gloss

Colour: Available in White, can be tinted with ODATEINTE (not to exceed 5%)

Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.

Precaution information:

the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.

Packaging:

1 Kg, 4 Kg, 15 Kg

Classification:

NM03-3-009
Category I class 7b2.

Health & Safety:

This product is not classified as dangerous. For more details, consult the safety data sheet.

Cost calculator

m²?

Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.

* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Products