ODAFER is an anticorrosive primer in aqueous phase for metals containing no toxic substances.
Destination: Indoor/Outdoor use
- Very low COV
- Very easy to apply
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: roller or brush
Dilution: Ready to use
Application method: Apply the 1st coat of undiluted ODAFER After 3 hours of drying
apply the 2nd coat of undiluted ODAFER Top Coat Apply the ODALAC paint (see ODALAC TDS)
Spreading-rate: 5-6 sqm/L
Drying: Dust free : 1h
Touch dry : 3h
Cleaning of equipments: With water, immediately after use
Density: 1.45 +/- 0.05
PH : 7.5 / 8.5
Viscosity: 115 +/- 5 KU at 25°C
Binder: Acrylic dispersion
Appearance of the film: Semi gloss
Colour: White & Red oxide
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
1 Kg, 4 Kg
Category I class 7b2.
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet.
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.