ODAPLAST
DESCRIPTION:
ODAPLAST is an ecological water borne matt paint work indoor
ODAPLAST is recommended as a primer or as paint for ceilings, concrete walls and cement coated.
Destination: For Indoor use
GENERAL FEATURES:
- Odourless
- Very low COV
- Very easy to apply
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: roller or brush
Dilution: 5 to 10 % water for brush & roller
Application method: Apply the first coat of ODAPLAST 5000 diluted up to 10% with roller or brush
2nd coat : After 3 hours of drying apply the 2nd coat of ODAPLAST 5000 diluted up to 5%
2nd coat : After 3 hours of drying apply the 2nd coat of ODAPLAST 5000 diluted up to 5%
Spreading-rate: 5 to 6 sqm/kg
Drying: Dust free : ½ h
Touch dry : 1 h
re-coatable : 3h
Touch dry : 1 h
re-coatable : 3h
Cleaning of equipments: With water, immediately after use
Technical characteristics:
Presentation:
Density: 1.73 +/- 0.05
PH : 7.5 / 8.5
Viscosity: 500 +/- 50 Po at 25°C
Binder: Copolymer dispersion
VOC:
SVOC:
Thinner: Water
Appearance of the film: Smooth, matt finish
Colour: Available in white, can be tinted with ODATEINTE (do not exceed 5%)
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
Precaution information:
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
Packaging:
5kg, 10kg, 30kg & 45 kg
Classification:
NM03-3-009
Category I class 7a2.
Category I class 7a2.
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet.
Cost calculator
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Technical data