ODAQUA is an ecological waterborne matt vinylic paint for indoor and outdoor work.
ODAQUA has a good whiteness and great ease of application
Destination: Indoor/Outdoor use
- Very low COV
- Very easy to apply
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: roller or brush
Dilution: 5 to 10 % water for brush & roller
Application method: Apply the first coat of ODAQUA diluted up to 10% with roller or brush
2nd coat : After 3 hours of drying apply the 2nd coat of ODAQUA diluted up to 5%
Spreading-rate: 6 to 7 sqm/kg
Drying: Dust free : ½ h
Touch dry : 1 h
re-coatable : 3h
Cleaning of equipments: With water, immediately after use
Density: 1.70 +/- 0.05
PH : 7.5 / 8.5
Binder: Copolymer dispersion
VOC: Less than 1 g/L (requirement according to the repository Ecolabel EU: 10g/L)
Appearance of the film: Smooth, matt finish
Colour: Available in white, can be tinted with ODATEINTE (do not exceed 5%) or according to colour card
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
5kg, 10kg, 30kg & 45 kg
Category I class 7a2.
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet.
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.