Home / Products

You can search for the product you want directly



PRIMER DECOLISS is an ecological water borne undercoat with smooth finish intended for decorative finishes.
Destination: Intérieur
  • Odourless
  • Very low COV
  • Very easy to apply


Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: roller or brush or spray gun
Dilution: 5 to 10 % water for brush & roller, 30% for spray gun
Application method: Apply the first coat of PRIMER DECOLISS diluted up to 10% with roller or brush
2nd coat :
After 3 hours of drying apply the 2nd coat of PRIMER DECOLISS diluted up to 5%
Spreading-rate: 1st coat : 8 to 9 sqm/kg
2nd coat : 9 to 10 sqm/kg
Drying: ½ h
touch-dry : 1 h
re-coatable : 3h
Cleaning of equipments: With water, immediately after use

Technical characteristics:

Density: 1.46 +/- 0.05
PH : 7.5 / 8.5
Viscosity: 90 +/- 5 KU at 25°C
Binder: Acrylic Aqueous dispersion
VOC: Less than 1.9 g/L (requirement according to the repository Ecolabel EU: 10g/L)
SVOC: Less than 8.8 g/L (requirement according to the repository Ecolabel EU: 30g/L)
Thinner: Water
Appearance of the film: Matt
Colour: Available in White, can be tinted with ODATEINTE (do not exceed 5%)
Storage: One year in the closed paint can, as delivered. Store inside avoiding extremes of temperatures and protect form frost

Precaution information:

the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85% relative humidity level


1 kg, 4 kg, 15 kg


Category I class 7b2.

Health & Safety:

This product is not classified as dangerous. For more details, consult the safety data sheet.

Cost calculator


Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.

* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.

Technical data