ODAPORES is an ecological water borne wood surfacer.
ODAPORES fills the holes and gives after ginning a smooth surface which facilitates the application of the top coat ODABOIS
Destination: Indoor/Outdoor use
- Very low COV
- Very easy to apply
PREPARATION & APPLICATION:
Surface Preparation: (Referred to the D.T.U. 59.1 requirements): The surface must be well prepared, perfectly dry, dust-free, with no humidity and salt stains.
Application Tools: Brush or spray gun
Application method: Colored finish: Apply two coats ODABOIS diluted up to 30% with water, on a prepared substrate and apply one coat of ODAPORES and one coat of neutral ODABOIS
Neutral finish: Apply one coat of ODAPORES and one coat of neutral ODABOIS
Spreading-rate: 10-14 sqm/L
Drying: Dust free: 1/2h
Touch dry: 1h
Cleaning of equipments: With water, immediately after use
Density: 1.03 +/- 0.05
PH : 7.5 / 8.5
Viscosity: 100 +/- 5 KU at 25°C
Binder: Acrylic dispersion
Appearance of the film: Semi gloss
Storage: One year in the closed paint can, as delivered. Store inside in conditions avoiding extremes of temperatures and protect from frost.
the support must be hard, cohesive, clean, sound and dry. It is not advisable to apply below 5°C (41°F) temperature and above 85 % relative humidity level.
Category I class 7b2.
Health & Safety:
This product is not classified as dangerous. For more details, consult the safety data sheet.
Estimated quantity: 0.
Estimated total cost *: 0 Dhs TTC.
* the estimate of the price concerns only the selected product, and to have it as finishing it is necessary to apply other products of preparation. This estimate may change depending on the condition of the substrate and the chosen paint system.
* the estimate of the quantity of paint required is given in units (kg or liter), and the purchase is made according to the available footages for each product.