YKONE is an ecological, waterborne decorative paint for interiors. YKONE can be used to create a variety of decorative effects: travertine marble, crocco, tadelakt, stone and striped marble.
Available dealers
YKONE
Decorative paints
Pearly
Odorless- Very low VOC
- Various decorative effects
- Filling product
- No trade-in
- ROUGH MARBLE EFFECT : Apply YKONE using a stainless steel float on a substrate already prepared with "DECOFONDO". While the product is still wet, use the special brush (COSMIC brush) to create irregular, wavy marbling in an oblique direction, from top to bottom and from bottom to top. When the product begins to dry, spray with water to help smooth YKONE with the stainless steel float. After 24 hours drying time, apply one coat of neutral ODAVERNIS 500 with a sponge, followed by two coats of tinted ODAVERNIS according to the chosen reference, 4 hours apart. - YKONE CROCCO Effect Apply YKONE to "DECOFONDO" using a stainless steel float. While the product is still wet, create the CROCCO effect using the special roller. When the product begins to dry, spray with water to help smooth YKONE with the stainless steel float. After 24 hours, apply one coat of neutral ODAVERNIS 500 with a sponge, then two coats of tinted ODAVERNIS according to the chosen reference, at 4-hour intervals. - YKONE TRAVERTIN Effect Apply the 1st coat of YKONE tinted using the stainless steel float on "DECOFONDO". After 24 hours drying time, apply the 2nd coat of tinted YKONE using a stainless steel float, creating the desired effect. When the product begins to dry, spray with water to help smooth YKONE with the stainless steel float. - YKONE TADELAKT effect Apply the 1st coat of YKONE tinted using the stainless steel float on "DECOFONDO". After 24 hours drying time, apply the 2nd coat of YKONE. When the product begins to dry, spray with water and smooth with a stainless steel float. - YKONE TAILLED STONE Effect Preparing the wall with DECOFONDO Draw horizontal, even strips on the wall, and apply a coat of tinted YKONE in every second strip, using a stainless steel float. After 24 hours drying time, apply the 2nd coat of YKONE to the same strips already painted. When the product begins to dry, spray with water to smooth the YKONE strips with a stainless steel float. Apply one coat of tinted YKONE with the stainless steel float to the unpainted strips. After 24 h drying time, apply the 2nd coat of YKONE with the stainless steel float to the same strips already painted, using the special brush (COSMIC brush) over the entire surface of the strips. When the product begins to dry, spray with water to smooth the strips.
